English
1. Different hardware revisions
Step 1 of 40 (Chapter 1 of 2)
Contents
Comments
⬢There are more hardware revisions of the XZ-axis, please check the following photos to select the appropriate assembly procedure:
⬢The XZ-axis has the opening on the left, continue using this assembly guide.
⬢The XZ-axis has the opening on the right, jump to the following guide Building your MINI+
Loading...
Contents
Original Prusa MINI assembly
- Building your MINI
- Different hardware revisions
- Unboxing and assembly by Josef Prusa
- All the required tools are included
- Use labels for reference
- We are here for you!
- XYZ-axes parts preparation
- XYZ-axes parts preparation
- Foam pads - preparation
- Foam pads installation
- Opening the box with the electronics
- Connecting the LCD cable
- Protecting the LCD cable
- Connecting the Y and XZ-axis assembly
- Joining the parts together - phase 1
- Joining the parts together - phase 2
- Joining the parts together - phase 3
- Aligning the XZ-axis assembly
- Final tightening
- Haribo time!
- LCD parts preparation
- Mounting the LCD
- Connecting the LCD
- Connecting the Y-axis cables
- Connecting the Y-axis motor
- Connecting the Y-axis thermistor and heater
- Filament sensor (optional)
- Filament sensor installation (optional)
- Connecting the filament sensor (optional)
- Covering the electronics
- Haribo time!
- Spool holder parts preparation
- Spool holder parts preparation
- Assembling the spool holder base(s)
- Adding the spool holder rails
- Adjusting the spool holder width
- Attaching anti-slip pads
- Haribo time!
- Finalising the assembly
- Connecting the PSU
- What is next?
- Manual changelog MINI semi-assembly
Comments
Log in to post a comment
No comments